What are Corrections?
After tracking completes, the corrections stage in ABC Tracker allows for:
ABC Tracker will soon allow sharing tracking results with the scientific community through the KNB Repository
What are the differences between Manual Mode and Guided Mode?
|Manual Mode||Guided Mode|
|You select which track to modify||ABC Tracker asks for information on a particular track|
|You select which operation to perform to modify the track||ABC Tracker performs operations automatically based on your input|
|You select the time frame to adjust||ABC Tracker queues up a few seconds of video footage and presents it for review|
In general, it is recommended to complete guided reviews first and then perform manual reviews
This is because guided reviews leverage behind-the-scenes tracking data to make semi-automatic connections, reducing the amount of manual effort to get accurate results
ABC Tracker automatically generates pre-built reviews for you to complete. These are instances where ABC Tracker has some tracking data available, but needs more confidence about a particular object's location or orientation. ABC Tracker will ask questions about an object, and then use your input to track that object and/or neighboring objects automatically.
Read the complete article on Guided Mode
ABC Tracker has a complete suite of tools to manually correct tracking data. These tools provide the ability to:
Read the complete article on Manual Mode
What do the Markings on Objects Mean?
Solid vs. Dashed Bounding Box
The solid vs. dashed bounding boxes indicate the presence or absence of detections for an object in a specific frame:
As Guided Reviews are completed, many of the dashed bounding boxes will disappear. This is because Guided Reviews are specifically chosen to provide ABC Tracker with the additional information it needs to have more confidence on an object's location.
Diamond on Short Edge of Bounding Box
There is a small diamond located on one end of each object. This diamond shows the position of the object's head.
Many of the incorrect orientations are automatically corrected during Guided Reviews, so often it is more efficient to complete the guided reviews first and then review the object orientations.
Orientation of Bounding Box
In ABC Tracker, the orientation of each object is visualized by the orientation of the object's bounding box. When these results are exported to CSV, the orientation is recorded using an image coordinate system (in clockwise order):
How To Perform Corrections
The method of performing corrections depends on the correction "mode." See the following pages for details on performing corrections:
Saving Your Work
ABC Tracker saves all corrections automatically. After a correction is performed, the green checkmark at the bottom-left corner of the playback window switches to a spinning gear. This indicates that ABC Tracker is processing the correction that was just completed, and the spinning gear will switch back to a green checkmark once the correction is finished processing.
Undo Recent Corrections
Corrections can be undone at any time. After pressing the "undo" button at top-left corner of the video playback window, ABC Tracker will confirm that you would like to undo the last correction operation that was performed.
After performing an "undo" operation, it is best to wait until the green checkmark is displayed in the bottom left corner of the video playback window (see "Saving Your Work" section for screenshot).
This ensures that the tracking data being shown in ABC Tracker reflects the undo operation that was performed.
Video Playback Tools
During corrections, ABC Tracker offers several video playback tools that can increase productivity.
To read more on these tools, see Video Playback Tools
Statistics and Visualization Tabs
Correction Progress Tab
During manual mode, the correction progress tab will display three statistics:
- Guided Progress
- Displays how many guided reviews have been completed vs. how many reviews are currently available
- Estimated Accuracy
- This field is currently not in use. The development team is considering many different methods of calculating estimated accuracy.
- Completed Tracks
- Displays the number of tracks that are "Marked Completed" (see Manual Mode) vs. the total number of objects tracked in video
Gantt Chart Tab
The Gantt chart displays one horizontal bar for each track. The length of the bar indicates the duration of the track. The x-position of the bar indicates the time-position of the track (beginning, middle, or end of the video).
To make the Gantt chart disappear, move the cursor off of the Gantt chart area and onto the video playback window
Visualization Properties Tab
All visualizations that are shown on the video player can be adjusted. Use the Visualization Properties tab to:
- Shuffle the bounding box colors
- Apply a global color for all bounding boxes
- Distinguish completed tracks (by swapping the bounding box with a star)
- Show/hide bounding boxes
- Differentiate between interpolated frames using a dashed marker
- Change between available marker types:
- Show track ID's
- Show tails to visualize an object's recent locations
Page Settings Tab
There are also global settings for the video playback window: